W-111 PU THINNER
W-111 PU Thinner is a premium-grade solvent specially formulated for use with polyurethane (PU) paints, primers, and clear coats. It ensures proper viscosity adjustment, smooth spray application, and improved flow and leveling for professional automotive and industrial finishing.
Key Features:
✔ Optimized for PU Paint Systems
✔ Improves Flow & Leveling
✔ Enhances Gloss & Surface Smoothness
✔ Fast & Controlled Evaporation Rate
✔ Reduces Orange Peel & Spray Marks
✔ Ensures Uniform Film Formation
Application:
Add recommended quantity to PU primer, basecoat, or clear coat as per technical guidelines. Mix thoroughly before application. Use suitable spray equipment under controlled conditions.
W-112 2K THINNER
W-112 2K Thinner is a high-quality solvent specially formulated for use with two-component (2K) paint systems including primers, basecoats, and clear coats. It ensures proper viscosity control, excellent spray performance, and smooth flow for professional automotive and industrial finishing.
Key Features:
✔ Specially Designed for 2K Systems
✔ Balanced Evaporation Rate
✔ Improves Flow & Leveling
✔ Enhances Gloss & Film Appearance
✔ Reduces Spray Defects & Orange Peel
✔ Promotes Uniform Drying
Application:
Add recommended proportion to 2K primer, basecoat, or clear coat as per technical guidelines. Mix thoroughly before spray application. Use under controlled spray booth conditions for best results.
W-350 Blending Thinner
W-350 Blending Thinner is a specially formulated solvent designed to achieve smooth and invisible blending during automotive spot and panel repairs. It softens the edges of freshly applied paint, ensuring seamless transition between old and new coatings without visible paint lines.
Key Features:
✔ Specially Developed for Spot Repairs
✔ Softens & Melts Clear Coat Edges
✔ Ensures Smooth & Invisible Blending
✔ Controlled Evaporation Rate
✔ Reduces Overspray Edges
✔ Improves Final Finish Appearance
Application:
Apply lightly over blending area immediately after clear coat application. Use controlled spray technique to melt and smooth the edge transition. Allow proper drying before polishing.